How to Attach the Version 2.0 Fermentation Hub to the Tank Connector Assembly
PLEASE NOTE: There are currently two versions of the BrewIQ Fermentation Hub
Version 1.5 - features two plastic hoses on top of the Hub, with a sample valve on bottom left.
Version 2.0 - features two metal valves on top of the Hub with no hoses.
Materials required:
- Clean, Sanitized, and Installed Tank Connector Assembly and Filter - How to Clean and Sanitize the Tank Connector
- Clean and Sanitized Fermentation Hub - How to Clean and Sanitize the Version 2.0 Fermentation Hub [w/ Video]
Attaching the Fermentation Hub to the Tank Connector
- Remove the thumb screw on top of the Fermentation Hub
- Slide the handle of the Hub over the legs of the Hanger, and loosely screw the thumb screw in, connecting the Hub to the Hanger. The Hub can be set down on the Hanger legs now, if need be.
- Push upwards on the Fermentation Hub, connecting the valves of the Hub and the valves of the Tank Connector. You will hear a click from each valve when it is connected properly!
- Fully screw in the two thumb screws on the Hanger to secure the Fermentation Hub
Please note!
- The Fermentation Hub MUST be connected properly to the Tank Connector prior to the fermentation being started in the BrewIQ Dashboard
- Ensure you hear two clicks when attaching the Hub to the Tank Connector
- Ensure the Fermentation
Hub is level with the Tank Connector. If it is not, please remove the Hub and reconnect it to the Tank
Connector
Related Articles
BrewIQ version 5 Tank Connector SOP
PLEASE NOTE: There are currently two versions of the BrewIQ Fermentation Hub Version 1.5 - features two plastic hoses on top of the Hub, with a sample valve on bottom left. Refer here for How to Attach the Version 1.5 Tank Connector to Fermentation ...How to Attach the Version 1.5 Tank Connector to Fermentation Tank [w/ Video]
PLEASE NOTE: There are currently two versions of the BrewIQ Fermentation Hub Version 1.5 - features two plastic hoses on top of the Hub, with a sample valve on bottom left Version 2.0 - features two metal valves on top of the Hub with no hoses. Refer ...How to Attach the Version 2.0 Tank Connector to Fermentation Tank
PLEASE NOTE: There are currently two versions of the BrewIQ Fermentation Hub Version 1.5 - features two plastic hoses on top of the Hub, with a sample valve on bottom left. Refer here for How to Attach the Version 1.5 Tank Connector to Fermentation ...How to Attach the Version 1.5 Fermentation Hub to the Tank Connector [w/ Video]
PLEASE NOTE: There are currently two versions of the BrewIQ Fermentation Hub Version 1.5 - features two plastic hoses on top of the Hub, with a sample valve on bottom left. Version 2.0 - features two metal valves on top of the Hub with no hoses. ...How to Clean and Sanitize the Tank Connector
Cleaning and Sanitizing Materials Required (1) Bucket (1) Tank Connector Peracetic Acid Cleaner compatible with Stainless Steel - for example PBW, Cell-r-Mastr, or Caustic (1) Valve Release Set for Version 4 Tank Connectors (contains the lever to ...