How to Install Filter Upgrade for BrewIQ Cleaning Buckets
In our continuing effort to make BrewIQ Fermentation Hub cleaning easy and trouble-free, we now require a filter in each of the three (3) cleaning buckets to reduce the chances of debris in the buckets being circulated into the BrewIQ Fermentation Hub and fouling the pumps. The upgrade is expected to take 5 minutes.
In our continuing effort to make BrewIQ Fermentation Hub cleaning easy and trouble-free, we now require a filter in each of the three (3) cleaning buckets to reduce the chances of debris in the buckets being circulated into the BrewIQ Fermentation Hub and fouling the pumps. The upgrade is expected to take 5 minutes.
Materials Required
- (1) Rinse Bucket
- (1) Clean Bucket
- (1) Sanitize Bucket
- Materials from shipment by Precision Fermentation
- (3) Filters and Tubes (connected with an adapter and clamp)
- (3) Additional clamps
Installation of Filters for BrewIQ Cleaning Buckets
1. Place the RINSE, CLEAN, and SANITIZE buckets in front of you
2. Identify the port on the bucket that flows OUT of the bucket and INTO the Hub.
3. On the inside of the bucket, push the open end of the tube+filter onto the barbed end of the fitting on the port you identified in Step 2. Push the tube+filter on as far as possible but with at least 3/4" (2cm) of overlap.
4. Open the clamp, and place it over the tube and barbed fitting. Squeeze the clamp to secure it.
Related Articles
BrewIQ version 5 Tank Connector SOP
PLEASE NOTE: There are currently two versions of the BrewIQ Fermentation Hub Version 1.5 - features two plastic hoses on top of the Hub, with a sample valve on bottom left. Refer here for How to Attach the Version 1.5 Tank Connector to Fermentation ...How to Clean, Sanitize, Assemble, and Install the White River Tank Connector
The following are instructions for assembling and installing the White River Tank Connector ONLY (pictured below) For instructions on how to clean and install our Standard Tank Connector (the single piece with yellow handles and two pipes that enter ...BrewIQ User Guide - Downloadable PDF
PLEASE NOTE: There are currently three versions of the BrewIQ Fermentation Hub. Version 1.5 - features two plastic hoses on top of the Hub, with a sample valve on bottom left. Version 2.0 - features two metal valves on top of the Hub with no hoses. ...How to Use The Multi-Hub Cleaning Station: BrewIQ's SaniStation
Cleaning and Sanitizing Materials Required SaniStation Tap Water Connection Sink to drain (or trench drain) 120V Power Outlet Liquid PBW Concentrated PAA Always use PPE (Safety Glasses & Gloves minimum) when working with the SaniStation. Be ...How to Attach the Version 2.0 Fermentation Hub to the Tank Connector Assembly
PLEASE NOTE: There are currently two versions of the BrewIQ Fermentation Hub Version 1.5 - features two plastic hoses on top of the Hub, with a sample valve on bottom left. Refer here for How to Attach the Version 1.5 Tank Connector to Fermentation ...